ACETY
ACETY EC
Introducing the newly developed
ACETY EC
Providing eyewear quality
and peace of mind
| NEW MATERIAL |
A new material only possible from Daicel,
a chemical manufacturer handling
manufacturing and
sales of everything from acetate fiber to pellets and sheets.
| FEATURES |
About Sheet
Environmentally friendly, high-biomass,
phthalate-free material
Uses phthalate-free plasticizer.
Compared to conventional Acety, it has achieved an approximately 10% improvement in biomass content.
(*Calculated internally based on ISO 16620-1 and -4)
Uses raw materials that are made in Japan
High dimensional stability
In constant temperature and humidity testing, warping and shrinkage are reduced by approximately 50 to 60% compared to conventional acetate. Achieves higher dimensional stability, contributing to the creation of high-quality eyewear.
Can be processed similar to standard Acety sheets
About Pellet
Environmentally friendly, high-biomass,
phthalate-free material
Uses phthalate-free plasticizer.
Compared to conventional Acety, it has achieved an approximately 10% improvement in biomass content.
(*Calculated internally based on ISO 16620-1 and -4)
Made in Japan
Luxurious sheen and luster with a pleasant feel against the skin
Achieve a beautiful luster through polishing alone, without coating
Compared to conventional Acety,
high-dimensional stability enables thin
frame molding
|ACETY EC STANDARD SPECIFICATION |
Properties
Test methods
Test conditions
Units
ECP E0002-28
Melt mass-flow rate
ISO 1133
220℃/10kg
g/10min
70.7
Tensile strength
ISO 527
-
MPa
39.5
Flexural strength
ISO 178
-
MPa
47.2
Flexural modulus
ISO 178
-
MPa
1900
Notched Charpy impact strength
ISO 179/1eA
23℃g/cm3
kJ/m2
13.5
Deflection temperature under load
ISO 75
1.80MPa
54.7
Density
ISO 1183
-
g/cm3
1.26